Wireless Access

 View Only
last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Expand all | Collapse all

I have a 8.3 MM with 2 controllers attached, how do I delete AP's

This thread has been viewed 11 times
  • 1.  I have a 8.3 MM with 2 controllers attached, how do I delete AP's

    Posted Jun 04, 2018 01:04 PM

    I have 8 AP's the incorrectly connected to my lab MM controllers,  they have been redirected to the correct place but now I see 8 down AP's on my MM.   How do I delete them?



  • 2.  RE: I have a 8.3 MM with 2 controllers attached, how do I delete AP's
    Best Answer



  • 3.  RE: I have a 8.3 MM with 2 controllers attached, how do I delete AP's

    Posted Jun 04, 2018 04:44 PM

    Thanks Colin, that did it.



  • 4.  RE: I have a 8.3 MM with 2 controllers attached, how do I delete AP's

    Posted Apr 13, 2021 12:49 PM
    Hi,

    I have a smiliar issue where I cant remove an entry which is no longer seen on the MM controller but still being seen on the MD controller

    Every command I try to run from the MD controller says 'This command must be run on the master.'

    Any adivse will be greatly appreciated

    David

    ------------------------------
    David Hurley
    ------------------------------