We have been deploying a wireless network with several campus, using Mobility Master to manage our Mobility Controllers. At the beggining everything was working fine, and we were able to rename the campus APs, but suddenly the Mobility Master stopped from rename APs, we have tried using the WebUI and ssh too, the AP reboots and it remains with the same name.
So, I was wondering if any of you have experimented this problem.
Thank you in advance.
What version of ArubaOS on the MM and what version on the Aruba Controller?
Version: 184.108.40.206 on both MM and Controllers.
Is the access point in the AP Whitelist? "
show whitelist-db cpsec
Yes, I just checked.
Does the cpsec whitelist have the APs new name or old name?
Sorry I hit the Solution button by mistake.
And it has the oldname.
You shouldn't have to do this, but change the name or ap-group of a single AP in the cpsec whitelist. Reboot the AP and see if it takes the new name or ap-group.
At Aruba, we believe that the most dynamic customer experiences happen at the Edge. Our mission is to deliver innovative solutions that harness data at the Edge to drive powerful business outcomes.
© Copyright 2021 Hewlett Packard Enterprise Development LPAll Rights Reserved.