i have a trouble with AP 325 Aruba, the AP are steel booting and I can't reset to factory, in the partion i have 0 no os the other partion 1 i have the OS
apboot> osPartition 0 does not contain a valid OS image
Partition 1:image type: 0machine type: 40size: 7211308version: 188.8.131.52-wave2build string: ArubaOS version 184.108.40.206-wave2 for 32x (p4build@cyprus) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #49847 SMP Thu Apr 30 14:49:32 PDT 2015flags: preserve factoryoem: aruba
Image is signed; verifying checksum... passedSigner Cert OKPolicy Cert OKRSA signature verified.
i boot it in the partion 1 but steel can't reset it
i read in the forum that i need to change OS because there is a bug in this version: 220.127.116.11-wave2, i can't download the os somme one can help me please
when the AP boot, it stop in this stat and reboot
Getting an IP address...[ 40.157950] Kernel watchdog refresh ended on core 0.[ 40.277944] Kernel watchdog refresh ended on core 1.[ 40.722149] eth0: 100Mbps FullDuplex[ 40.998000] bonding: bond0: link status definitely up for interface eth0, 100 Mbps full duplex.[ 41.091783] bonding: bond0: making interface eth0 the new active one.[ 41.170071] bonding: bond0: first active interface up![ 41.230459] ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready10.10.10.2 255.255.255.0Running ADP...
thank you for your help
The boot log does not show the AP finding its master.
Who is the master controller for this AP?
How is the AP set up to discover the master controller?
--Give Kudos: found something helpful, important, or cool? Click Kudos Star in a post.--Problem Solved? Click "Accepted Solution" in a post.
Thank's for the unswer
I don't have the master how can i do if i don't
I have only one AP, because I recovered it to deploy it in another place, i can't get the controler
Please someone have an idea how to reset it.
If you have a single AP, the model number on the sticker must say IAP-325, otherwise it cannot operate by itself. You would need a separate hardware controller to work with an AP-325.
Thank you for your answer,
You can find the image i juste shared The mode of the AP, even if i setup the IP of the controler in APboot> herself that don't work i get this promp #, all commande don't work because of the permission, all commande look like linux cmd.
Thank you so much for the answer, how can i do now if i want to get the controleur, i read in the net i can use AirWave with VM to controle my AP 325, my question is how to download this for free and where i can download it, i buy this AP 325 very expensive for me
What is your requirement for the network?
A controller based AP also requires a license bundle to be purchased additionally for the AP to be used whether it is virtual or hardware based controller.
To use airwave to control the AP , You would first need a standalone MM setup or a MM-MD setup with SNMP&SSH enabled to the airwave server, this just calls for more licenses (MM-VA, MC-VA).
If you just want a wifi device that you can plug a ethernet cable with internet access to and get started, then i'd say swap the AP to an IAP Variant.
hey my requirement is juste one access point that i can broadcast one ssid, with my AP 325 i cannot configure that because th AP need a controler, before i work with IAP 515 and IAP 315 those categorie does't need a controleur and i can easly create, but with AP325 i can't do anything,
can i swap the AP to an IAP for this same physical model , because i just want a wifi devide that i plug a ethenet cable with internet access .
If that is your requirement then an IAP is a better way to go.
Contact your reseller/partner and enquire about changing the AP to an IAP.
At Aruba, we believe that the most dynamic customer experiences happen at the Edge. Our mission is to deliver innovative solutions that harness data at the Edge to drive powerful business outcomes.
© Copyright 2021 Hewlett Packard Enterprise Development LPAll Rights Reserved.