I have two controllers managed by MMs and two standalone controllers with vrrp enabled to be used for datazone purpose.
I would like to disable 80 Mhz channels on both zones but was not successful till now. I was trying it through arm-profiles assigned to dot11a profile, I was trying it through ht-ssid profiles assignned to sssid-profile.
I was trying to change those profiles on datazone controller, then on primaryzone controllers through MMs but no success. Channels are still with "E" tag.
Moreover I have seen that while trying to configure arm-profile through MMs, there is no option to disable 80 Mhz channels there. While on standalone controllers I can find this option under arm-profile.
Do you have any idea how to managed channel settings in case you have multizoning enabled?
There is no option under rf arm-profile to disable 80 MHz channels. As I have mentioned, while controller is in standalone mode, you will get this option. But as soon as you are trying to setup MD over MM, there is no option regarding 80 MHz channels setting under arm-profile anymore.
At Aruba, we believe that the most dynamic customer experiences happen at the Edge. Our mission is to deliver innovative solutions that harness data at the Edge to drive powerful business outcomes.
© Copyright 2021 Hewlett Packard Enterprise Development LPAll Rights Reserved.