Good day. We have have an Aruba 6.4 wireless controller. We recently had an AP malfunction. Aruba sent a replacement AP which was connected to the network and is appearing in the Default AP group. Now I want to remove the down AP from the database. Is it removed via the command line using the clear gap-db wired-mac command? Or can I do this using the GUI? We want to provision the new AP with the same name as what the down AP had. Just want to verify I have the correct process to remove the down AP from the database. Thanks in advance.
Yes, you can delete the defect AP with the command "clear gap-db wired-mac". In 6.x there is no GUI command for that, this feature is recent add in the latest ArubaOS 8.6 version.
If your new AP is "up" in the default ap-group, just re-provision it with the correct name and ap-group.
At Aruba, we believe that the most dynamic customer experiences happen at the Edge. Our mission is to deliver innovative solutions that harness data at the Edge to drive powerful business outcomes.
© Copyright 2021 Hewlett Packard Enterprise Development LPAll Rights Reserved.