Hi PA20,
The controller is act like a switch and you have to be sure to not make a spanning-tree loop. Your configuration looks fine to me aslong you connect to a separate oobm management switch.
AFAIK, if 0/0/0 is connected to the same switch as 0/0/2 is seems like you create a loop.
If connect data and management to only one upstream switch your can tag your management vlan 25 under the 0/0/2 interface.
------------------------------
Marcel Koedijk | MVP Guru 2021 | ACMP | ACCP | ACDA | Ekahau ECSE | Not an HPE Employee | Opionions are my own
------------------------------
Original Message:
Sent: Mar 26, 2021 02:11 PM
From: Pablo Almanza
Subject: Aruba 7240xm Management Port
Original Message:
Sent: Mar 26, 2021 03:19 AM
From: marcel koedijk
Subject: Aruba 7240xm Management Port
Hi PA20,
The Aruba 72xx series don't have a traditional OOBM interface. You should create an dedicated mananagement vlan with a vlan interface and bound this vlan to one of the uplink interface to your backhaul network infrastructure.
------------------------------
Marcel Koedijk | MVP Guru 2021 | ACMP | ACCP | ACDA | Ekahau ECSE | Not an HPE Employee | Opionions are my own
Original Message:
Sent: Mar 25, 2021 07:35 PM
From: Pablo Almanza
Subject: Aruba 7240xm Management Port
Hello everyone,
I am trying to find out how to make one of the ports (0/0/0) become dedicated as management port since on the 7240xm controller does not have a physical port for this. Can this be accomplished if so can you please let me know how? I have port 0/0/2 currently program and used as the controller ip and the main uplink since we are using sfp+. Port 0/0/0 since it will be only for management a rj45 cable is used.
Thank you in advance.