Wireless Access

last person joined: yesterday 

Access network design for branch, remote, outdoor and campus locations with Aruba access points, and mobility controllers.
Expand all | Collapse all

How to correctly configure source NAT on Aruba controller gateway? How does the intranet terminal use the dst-nat server through the external IP

This thread has been viewed 21 times
  • 1.  How to correctly configure source NAT on Aruba controller gateway? How does the intranet terminal use the dst-nat server through the external IP

    Posted 10 days ago
    Hey, guys,I have a question about Aruba controller NAT .
    I use Aruba 7010 as the gateway.
    VLAN 4000 is used as WAN interface, and the IP is static IP 221.2.2.2 .
    VLAN 10 is an office VLAN, and IP NAT inside is configured , ip address 192.168.1.1
    We have a web server in the office VLAN with an IP of 192.168.1.54. I configured port mapping for it and used port 8282 .
    Now, we access my internal server in any Internet access http://221.2.2.2:8282.

    However, I cannot access my server directly through 221.2.2.2 in my internal network , it doesn't work anymore. Only internal address 192.168.1.54:8080 can be used .

    I think it's because I haven't configured source NAT correctly .
    Please give me some help , thanks !

    ------------------------------
    eddy zhou
    whhcit.com
    Weihai . SD . China
    +86 13061120222
    ------------------------------


  • 2.  RE: How to correctly configure source NAT on Aruba controller gateway? How does the intranet terminal use the dst-nat server through the external IP

    Posted 7 days ago
    You should have "ip nat outside" on interface vlan 4000

    ------------------------------
    Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
    ------------------------------



  • 3.  RE: How to correctly configure source NAT on Aruba controller gateway? How does the intranet terminal use the dst-nat server through the external IP

    Posted 6 days ago
    Thank you for your reply ,  But it still hasn't been solved  .
    I have configured " ip nat ourtside " on VLAN 4000 ,   vlan 4000  is on the port G0/0/15 , I configured " ip access-list session " on this port  . 


    ip access-list session nat_thing
      any alias localip tcp 8888 dst-nat ip 192.168.1.54 8888
      any any any permit

    interface gigabitethernet 0/0/15
      description "GE0/0/15"
      trusted
      trusted vlan 1-4094
      ip access-group "nat_thing" session
      switchport access vlan 4000
      no spanning-tree

    interface vlan 4000
      ip address 221.2.2.2 255.255.255.240
      ip nat outside


    interface vlan 10
      ip address 192.168.1.1 255.255.255.0
      ip nat inside
      description "officenetworks"


    This is my current situation,


    I can access 221.2.2.2:8888 from any Internet,  when I was on the LAN , I can't access using the address of 221.2.2.2,  Only 192.168.1.54:8888 can be used .I think there is still a problem with the IP access list session configuration.




    ------------------------------
    eddy zhou
    whhcit.com
    ------------------------------



  • 4.  RE: How to correctly configure source NAT on Aruba controller gateway? How does the intranet terminal use the dst-nat server through the external IP

    Posted 6 days ago
    Hi, remove the Trust from GE0/0/15. Only If your Interface ist mit trusted the ACL will be used.
    Regards, Johnny

    ---------------------------------
    Johann Froehlich
    ---------------------------------





  • 5.  RE: How to correctly configure source NAT on Aruba controller gateway? How does the intranet terminal use the dst-nat server through the external IP

    Posted 5 days ago
    If I configure the port to untrust  ,  Then ACL will not be applied , even the port mapping function I use cannot be applied .


    ------------------------------
    eddy zhou
    whhcit.com
    ------------------------------