Wireless Access

 View Only
last person joined: 21 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Output of "show ap remote debug uac-list"

This thread has been viewed 16 times

  • 1.  Output of "show ap remote debug uac-list"

    Posted Nov 13, 2020 01:14 PM
    Can anyone offer an explanation of what the "heartbeats" column means in the output of "show ap remote debug uac-list" ? I'm guessing it is either a heartbeat count or sequence number, but I'd like to know what it all means.

    UAC list in AP datapath
-----------------------
Zone  Index  IP           AAC  STANDBY_AAC  Booster  Refs  Odev  Heartbeats                  STA Count  CTF MAC
----  -----  --           ---  -----------  -------  ----  ----  ----------                  ---------  -------
0     0      10.x.y.x     yes  No           1        1     tun0  131795/723/131764/0/0x9000  0          00:00:00:00:00:00
0     1      10.x.y.z     No   No           0        1           131768/0/0/0/0x9000         0          00:00:00:00:00:00
0     2      10.x.y.z     No   yes          1        1     tun4  131767/695/131718/0/0x9000  0          00:00:00:00:00:00


    ------------------------------
    Mark Williams
    ------------------------------


  • 2.  RE: Output of "show ap remote debug uac-list"

    Posted Nov 14, 2020 11:32 AM
    From what I can tell from some experimentation, it looks like the difference between the first and third numbers is the amount of lost heartbeats.

    ------------------------------
    Mark Williams
    ------------------------------

    Original Message