What the configuration on IAP ?
do you have check the log ?
what firmware release ?
------------------------------
PowerArubaSW : Powershell Module to use Aruba Switch API for Vlan, VlanPorts, LACP, LLDP...
PowerArubaCP: Powershell Module to use ClearPass API (create NAD, Guest...)
PowerArubaCL: Powershell Module to use Aruba Central
PowerArubaCX: Powershell Module to use ArubaCX API (get interface/vlan/ports info)..
ACEP / ACMX #107 / ACDX #1281
------------------------------
Original Message:
Sent: Jan 24, 2022 05:30 AM
From: Jonas Wennergren
Subject: IAP vpn to Virtual GW
Hi,
I have configured a L2 centralized IAP vpn tunnel to a Virtual gateway.
I can see that ISAKMP and IPSec is up between the AP en the gateway.
But the configured vlan interface is not offered to the tunnel.
"show iap table" shows only the mac address and that its up. Nothing at vlan assignment.
I have configured the vlan interface on the gateway and as L2 centralized on the IAP.
IAP has its def gw to the vlan interface on the gateway.
Any ideas what to look for?
------------------------------
Jonas
------------------------------