Wireless Access

Afternoon everyone, 

I am looking to deploy 11 AP-518's for a customer. While we've done a number of outside AP deployments with internal antenna's. This is our first project using external antenna. In reading the details for the ANT-3x3-5712 5Ghz 11.5dBi antenna, I see that 50ohm terminator is required.

Fine, however I seem to be google search challenged in finding a 50ohm RPSMA male terminator rated for 5Ghz (I have since found that some terminators are rated for up to 6Ghz). I can find 50ohm RPSMA  for 2.4Ghz easy enough. 

Can someone post a link on where I can source the correct terminator (US source pls). 

Here is a RPSMA 50ohm male, however I can't tell what the Ghz rating is. 

Amphenol RF 132360RP

This looks like exactly what I need, however I'd prefer to source it state side. 

50 Ohm Coaxial Terminator / Resistor - RP-SMA male (wifi-shop24.com)

Thanks. 
-Tim Mann

Afternoon everyone, 

I am looking to deploy 11 AP-518's for a customer. While we've done a number of outside AP deployments with internal antenna's. This is our first project using external antenna. In reading the details for the ANT-3x3-5712 5Ghz 11.5dBi antenna, I see that 50ohm terminator is required.

Fine, however I seem to be google search challenged in finding a 50ohm RPSMA male terminator rated for 5Ghz (I have since found that some terminators are rated for up to 6Ghz). I can find 50ohm RPSMA  for 2.4Ghz easy enough. 

Can someone post a link on where I can source the correct terminator (US source pls). 

Here is a RPSMA 50ohm male, however I can't tell what the Ghz rating is. 

Amphenol RF 132360RP

This looks like exactly what I need, however I'd prefer to source it state side. 

50 Ohm Coaxial Terminator / Resistor - RP-SMA male (wifi-shop24.com)

Thanks. 
-Tim Mann

Afternoon everyone, 

I am looking to deploy 11 AP-518's for a customer. While we've done a number of outside AP deployments with internal antenna's. This is our first project using external antenna. In reading the details for the ANT-3x3-5712 5Ghz 11.5dBi antenna, I see that 50ohm terminator is required.

Fine, however I seem to be google search challenged in finding a 50ohm RPSMA male terminator rated for 5Ghz (I have since found that some terminators are rated for up to 6Ghz). I can find 50ohm RPSMA  for 2.4Ghz easy enough. 

Can someone post a link on where I can source the correct terminator (US source pls). 

Here is a RPSMA 50ohm male, however I can't tell what the Ghz rating is. 

Amphenol RF 132360RP

This looks like exactly what I need, however I'd prefer to source it state side. 

50 Ohm Coaxial Terminator / Resistor - RP-SMA male (wifi-shop24.com)

Thanks. 
-Tim Mann

Afternoon everyone, 

I am looking to deploy 11 AP-518's for a customer. While we've done a number of outside AP deployments with internal antenna's. This is our first project using external antenna. In reading the details for the ANT-3x3-5712 5Ghz 11.5dBi antenna, I see that 50ohm terminator is required.

Fine, however I seem to be google search challenged in finding a 50ohm RPSMA male terminator rated for 5Ghz (I have since found that some terminators are rated for up to 6Ghz). I can find 50ohm RPSMA  for 2.4Ghz easy enough. 

Can someone post a link on where I can source the correct terminator (US source pls). 

Here is a RPSMA 50ohm male, however I can't tell what the Ghz rating is. 

Amphenol RF 132360RP

This looks like exactly what I need, however I'd prefer to source it state side. 

50 Ohm Coaxial Terminator / Resistor - RP-SMA male (wifi-shop24.com)

Thanks. 
-Tim Mann