Wireless Access

last person joined: 5 hours ago 

Access network design for branch, remote, outdoor and campus locations with Aruba access points, and mobility controllers.
Expand all | Collapse all

AWMS 8.2.12.1 installation issues with networking

This thread has been viewed 19 times
  • 1.  AWMS 8.2.12.1 installation issues with networking

    Posted Apr 26, 2021 12:16 PM
    Hi All!

    I am trying to upgrade from 8.2.9.1 (CentOS 6.9) to 8.2.10.1 (CentOS 7).  The upgrade appears successful but the network does not function.  It lets me configure the IP settings but it can't ping out and I can't ping it.   I still have a Dell Server.

    Has anyone seen that?

    ------------------------------
    Gary French
    ------------------------------


  • 2.  RE: AWMS 8.2.12.1 installation issues with networking

    Posted Apr 26, 2021 08:01 PM
    What is the IP address that you use?

    ------------------------------
    Dustin Burns
    ------------------------------



  • 3.  RE: AWMS 8.2.12.1 installation issues with networking

    Posted Apr 27, 2021 09:17 AM
    we use 10.10.200.28

    ------------------------------
    Gary French
    ------------------------------



  • 4.  RE: AWMS 8.2.12.1 installation issues with networking

    Posted Apr 27, 2021 05:54 AM
    Hi Gary,

    Few questions:

    • Did you configure eth0 (default) with the management IP address?
    • Do you have iDRAC configured?

    During upgrade to CentOS 7, Dell appliances have their ports remapped (behavior observed by TAC) so eth0 is now pointing to physical port 3 (physical ports are labeled 1-4, and eth0 was usually mapped to physical 1). During initial configuration, you could confirm which port is mapped to eth0 (or whatever logical port you configured when doing the initial configuration) as the MAC address is displayed at that time, and then compare what is shown in iDRAC GUI.

    ------------------------------
    [NesaM]
    ------------------------------



  • 5.  RE: AWMS 8.2.12.1 installation issues with networking

    Posted Apr 27, 2021 10:42 AM
    NesaM, 

    Thanks for your help.  That was it Everything is up and running!

    Gary


    ------------------------------
    Gary French
    ------------------------------