Hi Airheads,
My customer have two 7210_RW mobility controllers in a L2 cluster that's managed by a Mobility Conductor (Mobility Master whatever).
Both MC7210 controllers are geographical split over two datacenters with a layer 2 connection in between.
After upgrade from 8.6.0.13 to 8.6.0.15 we experience that the uplink interface is unstable an go down/up a couple of times a day. This happen on both controllers, at different time windows, since we do the upgrade to 8.6.0.15.
The interface 0/0/0 is configured with port-channel 0, the port-channel currently exsist with one interface, it was intend to create redundancy when needed later on but they never did.
Off course will create a TAC case for this issue, but maybe some of you have the same experience with this firmware version?
Example of the port-channel configuration (nothing special):
interface gigabitethernet 0/0/0
lacp group 0 mode active
lacp timeout long
interface port-channel 0
switchport mode trunk
switchport trunk allowed vlan all
switchport trunk native vlan xxx
trusted
trusted vlan 1-4094
------------------------------
Marcel Koedijk | MVP Guru 2021 | ACEP | ACMP | ACCP | ACDP | Ekahau ECSE | Not an HPE Employee | Opionions are my own
------------------------------