Wireless Access

 View Only
last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Per-AP radio profile override on mobility master Deployment

This thread has been viewed 13 times

  • 1.  Per-AP radio profile override on mobility master Deployment

    Posted Jan 11, 2022 10:09 AM
    Hello

    I have a Mobility master with two cluster controllers.

    I have an AP group where I deploy radio "a" and "g" profiles.

    I have a problem with deploying profiles at individual AP, for example, I want to disable 2.4 radio on some APs.

    I tried on CLI to configure individual AP with a different profile but with no success. 

    I hope you can help to find out what is the best practice with my situation. 

    AOS Version 8.7.0.0


    Thanks.


    ------------------------------
    Guram Mazmishvili
    ------------------------------


  • 2.  RE: Per-AP radio profile override on mobility master Deployment

    MVP GURU
    Posted Jan 11, 2022 10:16 AM
    You would want to edit the AP (At the appropriate folder level) with the "ap-name <ap-name>". See example below. This is me assigning radio profiles to just this AP:

    ap-name "MILLER-101-AP1"
    dot11a-radio-profile "5GHz 22db"
    dot11g-radio-profile "2.4Ghz 15db"

    In the radio profile you can set this for example:

    rf dot11g-radio-profile "2.4Ghz Off"
    no radio-enable

    or to change it to an airmonitor instead of off set "mode am-mode"



    ------------------------------
    Dustin Burns
    Lead Mobility Engineer @WEI

    ACCX 1271| ACMX 509| ACSP | ACDA | MVP Guru 2021
    If my post was useful accept solution and/or give kudos
    ------------------------------

    Original Message