Hi,
If you like to use VLAN 1 for your clients tagged on the switch uplink, you need to change the "Uplink Switch native VLAN". In your case this needs to be 19. This will make the IAP to tag VLAN 1 on the uplink.
BR
Florian
------------------------------
-------------------------------------------------------------------------------
Florian Baaske
-------------------------------------------------------------------------------
Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
-------------------------------------------------------------------------------
Also visit the AirHeads Youtube Channel:
https://www.youtube.com/channel/UCFJCnuXFGfEbwEzfcgU_ERQ-------------------------------------------------------------------------------
Feel free to visit my personal Blog
https://www.flomain.de------------------------------
Original Message:
Sent: Apr 19, 2021 11:22 AM
From: CFA van Dongen
Subject: VLAN tagging
Aruba Airwave 8.2
Aruba AP 365
Aruba 2530 24G PoE+
clients in default VLAN1 switch (DHCP POOL VLAN1)
APs in mgmt VLAN 19 (DHCP POOL VLAN19)
SSID clients VLAN1
switchport1 untagged VLAN19
switchport1 no untagged VLAN1
APs are receiving VLAN19 IP-address (OK)
Clients aren't receiving VLAN1 IP-address (NOK)
What needs to be done in Airwave or on the switch port to get this working?
help would be greatly appreciated.
Thank you!
------------------------------
CFA van Dongen
------------------------------