we're standalone controller 7005
version : 18.104.22.168_66308
we want to clear this alarm
currently iap mode is not in use
used in provisioning with the controller
Starting from Aruba OS 22.214.171.124 and 126.96.36.199 and above has introduced the user-role default-iap-user-role. It is used for when a SSID was configured for centralized L2 in the Instant AP then the user hitting the Aruba Controller will take up the user-role default-iap-user-role, however in your case you have advise there is no IAPs in use. Can you run the below command to confirm if the User Role is reference in any config?#show profile-errors#show rights default-iap-user-role
At Aruba, we believe that the most dynamic customer experiences happen at the Edge. Our mission is to deliver innovative solutions that harness data at the Edge to drive powerful business outcomes.
© Copyright 2021 Hewlett Packard Enterprise Development LPAll Rights Reserved.