Wireless Access

 View Only
last person joined: 22 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

IAP-303H, DHCP for wired clients

This thread has been viewed 8 times

  • 1.  IAP-303H, DHCP for wired clients

    Posted Feb 21, 2021 06:50 PM
    Hello,

    I have 4 x 303 IAP

    Is it possible to assign DHCP server to wired ports ? Preferably single port, rest can pickup DHCP from firewall.

    I'm not using central, but I wonder if it would ease management or does central interface replicates essentially IAP mode ?



    thx

    ------------------------------
    Max Mac
    ------------------------------


  • 2.  RE: IAP-303H, DHCP for wired clients

    EMPLOYEE
    Posted Feb 21, 2021 09:22 PM
    yes you can create a local DHCP scope.
    https://www.arubanetworks.com/techdocs/Instant_87_WebHelp/Content/instant-ug/dhcp-conf/conf-dhcp-sco.htm

    As part of this configuration, you assign a VLAN ID, which then you need to make it available for the wired ports.

    ------------------------------
    Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba.
    ------------------------------

    Original Message