Wireless Access

last person joined: yesterday 

Access network design for branch, remote, outdoor and campus locations with Aruba access points, and mobility controllers.
Expand all | Collapse all

Partition used for booting on AP

This thread has been viewed 7 times
  • 1.  Partition used for booting on AP

    Posted 25 days ago
    I wanted to find out the partition that our APs are booting off of. We are going to be doing an update, still using 6.5.4.x code. I wanted do the pre-image load but wanted to make sure it is on the non-boot partition.

    I have ran:
    show ap details ap-name APName


    and also:
    show ap details advanced ap-name APName

    With each one I don't see anything saying *default boot* like with you check the controller.

    Or does the pre-image load, automatically copy it to the correct partition on the AP?

    ------------------------------
    John Cameron
    ------------------------------


  • 2.  RE: Partition used for booting on AP

    Posted 25 days ago
    The active partitions on the APs will match the Controllers they are terminating to. If controller is Partition 0 for default boot, then AP is Partition 0.

    ------------------------------
    Dustin Burns
    Lead Mobility Engineer @WEI

    ACCX 1271| ACMX 509| ACSP | ACDA | MVP Guru 2021
    If my post was useful accept solution and/or give kudos
    ------------------------------