Wireless Access

 View Only
last person joined: 21 hours ago 

Access network design for branch, remote, outdoor and campus locations with Aruba access points, and mobility controllers.
Expand all | Collapse all

AP207 instant cluster client connected but no network response

This thread has been viewed 21 times
  • 1.  AP207 instant cluster client connected but no network response

    Posted Nov 26, 2021 09:49 AM
    Good afternoon,

    We are using Aruba instant cluster managed by an airwave server, AP are IAP207, 204 & 304, version 6.5.4
    I'm facing a strange behavior in my Wifi infrastructure, time to time a client connected to the Wifi suddenly don't have access anymore to the local network.
    Wifi is still connected, ip config is still there (ran an ipconfig) but even the default gateway doesn't reply to ping from the client.

    Sometimes after few minutes the client is able to reach the network again, sometime it takes 1 hour. To quickly recover network access the best is to disconnect and reconnect to the Wifi but it's not acceptable.

    I don't know where i could find information about this very annoying behavior.

    Thanks in advance for your help

    Regards,

    Olivier

    ------------------------------
    Olivier Cordiero
    ------------------------------


  • 2.  RE: AP207 instant cluster client connected but no network response

    EMPLOYEE
    Posted Nov 26, 2021 01:48 PM
    What kind of client is this and are you using encryption on that wireless network?

    ------------------------------
    Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
    ------------------------------



  • 3.  RE: AP207 instant cluster client connected but no network response

    Posted Nov 29, 2021 03:38 AM
    Clients are Windows 10 computer, Key management is WPA2-Enterprise.
    Thanks.

    Olivier

    ------------------------------
    Olivier Cordiero
    ------------------------------



  • 4.  RE: AP207 instant cluster client connected but no network response

    Posted Apr 08, 2022 02:35 AM
    Nobody having the same behavior / issue ?

    ------------------------------
    Olivier Cordiero
    ------------------------------



  • 5.  RE: AP207 instant cluster client connected but no network response

    EMPLOYEE
    Posted Apr 08, 2022 09:29 AM
    Can you double-check to make sure that the VLAN the client is connected to is trunked to the access point?

    ------------------------------
    Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
    ------------------------------



  • 6.  RE: AP207 instant cluster client connected but no network response

    Posted Apr 08, 2022 09:38 AM
    Yes it is. Most of the time everything works fine, but time to time the client seems losing network access without being disconnected from Wifi.

    ------------------------------
    Olivier Cordiero
    ------------------------------