Wireless Access

 View Only
last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Windows DHCP ping traffic from towards wireless client ip adresses

This thread has been viewed 8 times

  • 1.  Windows DHCP ping traffic from towards wireless client ip adresses

    Posted Sep 23, 2021 06:51 AM
      |   view attached
    Migrating to a windows DHCP server where ping connectivity from DCHP server (routed ip address) to wireless clients is required to check ip address is use or not. Which access-list to modify? Policies under user-roles? Or Firewall-CP internal?


    Currently edited the user-role policies to allow icmp from specific host (source alias) to network (destination network alias). But it is not
    working. Perhaps destination needs to be user?

    ------------------------------
    Arthur van de Wiel
    ------------------------------


  • 2.  RE: Windows DHCP ping traffic from towards wireless client ip adresses

    EMPLOYEE
    Posted Sep 23, 2021 07:51 AM
    You should allow ping from/to any destination.  Before a user obtains an ip address, it is not in the user table, so the user alias will not work in this situation.

    ------------------------------
    Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
    ------------------------------

    Original Message