Wireless Access

 View Only
last person joined: 14 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Aruba 8.0 install on Hyper-V

This thread has been viewed 15 times

  • 1.  Aruba 8.0 install on Hyper-V

    Posted Jan 25, 2022 01:02 PM
    Morning,

    This is probably old stuff for most of you - so bear with me. I am looking into installing/testing Aruba 8.0 (we are still on 6.5 - I know, I know...) Things just move slow for us.

    We are a Hyper-V shop. I know how to install the VM and what it takes. The piece I need assistance is the NIC settings, virtual switch... etc.
    Any assistance would be appreciated - like screen shots, settings on VM, Host... etc.

    Thanks,

    Chintan

    ------------------------------
    Chintan Patel
    ------------------------------


  • 2.  RE: Aruba 8.0 install on Hyper-V

    MVP EXPERT
    Posted Jan 25, 2022 05:22 PM
    Hi Chintan,

    Did you see the installation guides, deploying a virtual appliance on Hyper-V  is pretty good descripted. Do you plan to install only a standalone VMC or also install the Aruba Mobility Conductor to support features like clustering and airmatch.

    ArubaOS 8.6.0.0 Virtual Appliance Installation Guide
    • https://asp.arubanetworks.com/downloads/documents/RmlsZTo3NTA5OTVjNi00MjJlLTExZWEtYjc3MC1hM2JkY2VmZjJmOWQ%3D
    Hope this helps you

    ------------------------------
    Marcel Koedijk | MVP Expert 2022 | ACEP | ACMP | ACCP | ACDP | Ekahau ECSE | Not an HPE Employee | Opinions are my own
    ------------------------------

    Original Message