Wireless Access

 View Only
last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

adding a 315 ap to an 114,115,215 cluster

This thread has been viewed 8 times

  • 1.  adding a 315 ap to an 114,115,215 cluster

    Posted Oct 01, 2021 08:23 AM
    Hi Community 

    I have a new iap (315) and i wanted  to add it to my cluster (114,115,215)  but i am suspecting  that the config will be lost as the 315 will be the master vc 
    the firmware of the 315 is 6.5.4.6 while the firmware version of the cluster is 6.4.4.8
    another point is that i wanted to downgrade the 315 but found that the minimum os for 315 is 6.5.0.0 .

    Can you anyone help on this 

    thanks

    ------------------------------
    amine ettakani
    ------------------------------


  • 2.  RE: adding a 315 ap to an 114,115,215 cluster
    Best Answer

    EMPLOYEE
    Posted Oct 01, 2021 11:34 AM
    Your cluster would have to be running 6.5.0.0 to even "accept" the 315.  If you could upgrade the cluster to 6.5.0.0, that would allow you to add the 315 to the existing cluster.

    ------------------------------
    Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
    ------------------------------

    Original Message