Wireless Access

 View Only
last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

7205 controller power cord issue

This thread has been viewed 8 times

  • 1.  7205 controller power cord issue

    Posted Oct 19, 2021 01:00 PM

    Hi,

    I'm looking to add B2C or C13, C14 power cord within below controller but unable to find in HPE quick spec or in IRIS configurator. Is this power cord supported with this controller?

    (JW735A) Aruba 7205 (RW) 2-port 10GBASE-X (SFP+) Controller 

    BR//Shohidul 



    ------------------------------
    Shohidul Islam
    ------------------------------


  • 2.  RE: 7205 controller power cord issue

    Posted Oct 19, 2021 01:21 PM
    Here is the ordering guide: https://www.arubanetworks.com/resource/7200-series-mobility-controllers-ordering-guide/

    Looks like it depends on your country's standards.

    --



    Original Message


  • 3.  RE: 7205 controller power cord issue

    EMPLOYEE
    Posted Oct 20, 2021 08:33 AM
    The 7205-RW should take an 'ordinary' C13 for power. In your rack, you can use C13-C14 (female-male) cables to connect the controller to your power distribution.

    ------------------------------
    Herman Robers
    ------------------------
    If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.

    In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
    ------------------------------

    Original Message