Wireless Access

last person joined: 27 minutes ago 

Access network design for branch, remote, outdoor and campus locations with Aruba access points, and mobility controllers.
Expand all | Collapse all

OpenFlow - Enable/Disable any impact?

Jump to Best Answer
This thread has been viewed 11 times
  • 1.  OpenFlow - Enable/Disable any impact?

    Posted 27 days ago
    Hey all,

    As subject suggests, I recently came across our OpenFlow config is disabled on our MDs. Does anybody know if there's any client impact when re-enabling this?

    Some background - we had done this in a troubleshooting step months ago for an issue and it turned out to be unrelated, but we never re-enabled this. Now we're trying to do some UCC integrations and I'm unsure if it's causing us to not have the ucc clients show on the MM - and we're also missing some data on clients and APs that might also be related from what I was reading. I'm assuming best practice is to have this enabled on the MDs. 

    Thanks for the help!

    ------------------------------
    Michael Haring

    AirHeads MVP 2017, 2019-2021
    ------------------------------


  • 2.  RE: OpenFlow - Enable/Disable any impact?
    Best Answer

    Posted 27 days ago
    I proceeded with re-enabling the OpenFlow on our /md/ level for all of our 23 MDs, and once enabled, I successfully showed dozens of UCC clients and call information - it also appears that I'm seeing more information on my client list regarding health, signal quality, traffic destinations, etc. I did not see any impact to clients when re-enabling this.

    ------------------------------
    Michael Haring

    AirHeads MVP 2017, 2019-2021
    ------------------------------