I don't know this modem, but
according to this article, the second port requires an additional subscription from your ISP.
The alternative provided on that page is to put a NAT router in between and connect the RAP and your Google router to LAN ports on that router. If your Google router has additional LAN ports you might try to connect your RAP there; but I don't know Google routers either.
------------------------------
Herman Robers
------------------------
If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check
https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
------------------------------
Original Message:
Sent: Jan 12, 2021 04:41 AM
From: Leffler Hirthe
Subject: Aruba Remote Access Point to Arris T25
I have a Google WIFI router connected to an Arris T25 modem. The modem supports two ethernet ports, one of which I connect the router. I have an Aruba Remote Access Point for my job (corporate network) that I'd like to connect to the second ethernet port instead of connecting it to one of my Google Wifi points in Bridge mode. From what I've read on Arris, I need a second IP address to support this. I've called and used chat with Xfinity help; they both say they don't support it.
I've seen other posts here with similar questions. How do I obtain a second IP address for my Xfinity service?
------------------------------
Leffler Hirthe
------------------------------