Wireless Access

 View Only
last person joined: 23 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Combine Aruba Mobility Controller to support more AP

This thread has been viewed 15 times

  • 1.  Combine Aruba Mobility Controller to support more AP

    Posted Nov 25, 2020 03:12 AM
    Hi, is it possible to combine 2 Aruba Mobility Controller to support more AP? For example, the customer has Aruba 7010 in the environment, they want to add more than 32 APs. 
    Can I add another Aruba 7005 so that they can add another 16 AP, all the AP under the same management?

    Thank you.

    ------------------------------
    Wei Kwong Ong
    ------------------------------


  • 2.  RE: Combine Aruba Mobility Controller to support more AP

    MVP GURU
    Posted Nov 25, 2020 08:13 AM
    You could, but you may put yourself in a situation where you over subscribe a controller if the other fails. Best practice for redundancy is to make sure you have another controller/controllers that can take the full AP/Client load.


    ------------------------------
    Dustin Burns
    ------------------------------

    Original Message


  • 3.  RE: Combine Aruba Mobility Controller to support more AP

    Posted Nov 26, 2020 08:41 AM
    Hi,

    Yes, of course you can, and you can add a MM above the controllers and make use of its benefits

    https://www.arubanetworks.com/products/wireless/gateways-and-controllers/mobility-conductor/

    Take into account the Dustin's recommendation as well.

    ------------------------------
    Julian Ortiz
    ------------------------------

    Original Message