Far as i known the Aruba InstantON AP22 is a cloud managed access point and can't be only managed through the cloud portal. Not locally.
Ps. note that Aruba InstantON have there own community page which is the right place to ask this questions.
https://community.arubainstanton.com/------------------------------
Marcel Koedijk | MVP Guru 2021 | ACEP | ACMP | ACCP | ACDP | Ekahau ECSE | Not an HPE Employee | Opinions are my own
------------------------------
Original Message:
Sent: Jan 04, 2022 05:50 PM
From: Hache Esse
Subject: AP22 localy setup
Hello,
I want to setup and manage directly an ap22 without pass by Aruba Instant On. When I go in http on the ap22 with its address i can change only the ip address dynamic to static, the vlan and that s all. I can see on the chrome browseran authentication page is displayed quickly then disappears with a redirection on port 8081 or some information is displayed and or I cannot configure much except the static ip address.
It is possible like an 1930 switch to configure an ap22 localy ?
Thanks
------------------------------
Hache Esse
------------------------------