Wireless Access

last person joined: yesterday 

Access network design for branch, remote, outdoor and campus locations with Aruba access points, and mobility controllers.
Expand all | Collapse all

Question max. EIRP, TX and Gain

Jump to Best Answer
This thread has been viewed 11 times
  • 1.  Question max. EIRP, TX and Gain

    Posted Jul 29, 2021 11:44 AM
    Hi,

    the max. allowed E.I.R.P in Europe is 20dbm. Whats happen if an external antenna exceeds the limit "per design" (with gain and mimo without cable loss).

    15dbi antenna + 6dbi 4x4 MIMO Gain = 21dbm EIRP

    If i set the conducted Power to 0dbm, the EIRP is still too high.

    thanks!


  • 2.  RE: Question max. EIRP, TX and Gain
    Best Answer

    Posted Jul 29, 2021 04:45 PM
    In the Aruba software, all RF power setting and reported numbers are in EIRP levels. Power is adjusted "under the hood" for antenna gain, so for APs that support external antennas it is critical to provision the correct antenna gain numbers.
    Note that some of the platforms that support high-gain antennas, we can set the internal (per chain conducted) power to negative dBm values.

    ------------------------------
    Onno Harms
    ------------------------------