Wireless Access

last person joined: 6 hours ago 

Access network design for branch, remote, outdoor and campus locations with Aruba access points, and mobility controllers.
Expand all | Collapse all

VMC mgmt VLAN

This thread has been viewed 11 times
  • 1.  VMC mgmt VLAN

    Posted Apr 29, 2021 03:40 AM
    Hi to all,

    I'm planning to setup LAB with multiple VMCs thru esxi, however it seems
    I can only open GUI of VMC only if its in same vlan with esxi (VLAN2,mgmt).

    tested the following:
    a. esxi on untag/access port on switch
    b. created multiple vlans for simulation purposes(vlan 40,41) with ip gw on switch
    c. added port group with vlan id 40,41 and 4095(trunk) in separate vswitches inside esxi
    d.used vlan40 on network adapter 1& 2 iin a VMC with switchport access vlan 40, but still unable to reach vlan gw on switch
    e.changed network adapter 1&2 to vlan405, switch port trunk in VMC , still unable to reach GW

    any idea will be greatly appreciated :)

    ------------------------------
    Harvey Ysip
    ------------------------------


  • 2.  RE: VMC mgmt VLAN

    Posted Apr 29, 2021 04:15 AM
    Do you have an ARP entry for the default gateway on the VMC? Is the VLAN up on the VMC? Have you got the output of 'show port status' and 'show vlan status' ?

    ------------------------------
    Craig Syme
    ------------------------------



  • 3.  RE: VMC mgmt VLAN

    Posted Apr 29, 2021 05:26 AM
    got following results

    seems no data on arp.

    ------------------------------
    Harvey Ysip
    ------------------------------