Wireless Access

last person joined: 39 minutes ago 

Access network design for branch, remote, outdoor and campus locations with Aruba access points, and mobility controllers.
Expand all | Collapse all

Best practise for failover

This thread has been viewed 16 times
  • 1.  Best practise for failover

    Posted 29 days ago
    Hello,

    we have a Virtual MM and two Controllers.
    The Controllers are at the moment in a Cluster and a "Virtual Router in L2Redundancy" but i think that this is not working for a seamless fail over.
    So my question is what is the best way to get a HA with seamless failover?


    ------------------------------
    Patrick
    ------------------------------


  • 2.  RE: Best practise for failover

    Posted 29 days ago
    What is not working?  If APs discover two controllers in a cluster, they should automatically failover without configuring any HA "stuff".

    ------------------------------
    Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
    ------------------------------



  • 3.  RE: Best practise for failover

    Posted 8 days ago

    But for what is the "High availability" point under Redundancy?



    ------------------------------
    Patrick Schmitz
    ------------------------------



  • 4.  RE: Best practise for failover

    Posted 8 days ago
    That configuration was for redundancy before clustering.  It should not be used with clustering.


    ------------------------------
    Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
    ------------------------------