Wireless Access

 View Only
last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Duplicated AP names - remove stale entries

This thread has been viewed 28 times

  • 1.  Duplicated AP names - remove stale entries

    Posted Oct 01, 2021 04:35 AM
    My show ap-database list shows a couple of duplicated APs and the duplicates are old APs which we thought we had removed when we replaced the hardware.  On the controller and MM GUI they don't exist, they only show up in the cli.  The MM CLI command still shows them with an IP address and one controller address, but down.

    How can I clear these out of the ap-database?

    ------------------------------
    David Rickard
    ------------------------------


  • 2.  RE: Duplicated AP names - remove stale entries
    Best Answer

    EMPLOYEE
    Posted Oct 01, 2021 04:38 AM
    Use "show ap database long flags N" to find the APs that have duplicate names.

    Type "clear gap-db wired-mac <mac address of duplicate ap>" to attempt to remove it.


    ------------------------------
    Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
    ------------------------------

    Original Message


  • 3.  RE: Duplicated AP names - remove stale entries

    Posted Oct 01, 2021 04:44 AM
    Thank you, that appears to have solved it.

    ------------------------------
    David Rickard
    ------------------------------

    Original Message