Wireless Access

last person joined: 38 minutes ago 

Access network design for branch, remote, outdoor and campus locations with Aruba access points, and mobility controllers.
Expand all | Collapse all

Can't activate DPI on 7010

This thread has been viewed 10 times
  • 1.  Can't activate DPI on 7010

    Posted Feb 24, 2021 09:08 PM

    While debugging other issue I noticed that DPI doesn't seem to work properly on my 7010 controller running
    Exactly the same configuration works well on 7210 running
    I can see that committed configuration DOES have DPI activated
    (Aruba7010) [mynode] #show configuration committed | include dpi

    but it's not in firewall configuration (despite being enabled)
    (Aruba7010) [mynode] #show firewall | include DPI
    DPI Classification Disabled [Cfg: enabled, PEF license: installed]

    and not in running config either
    (Aruba7010) [mynode] #show running-config | include dpi
    Building Configuration...
    (Aruba7010) [mynode] #

    the only configuration difference is that 7210 has own licenses, and 7010 uses that 7210 as remote server for licensing.
    I already tried rebooting number of times turning dpi on/off - doesn't help.

    any suggestions on how to proceed with debugging this?


  • 2.  RE: Can't activate DPI on 7010

    Posted 26 days ago
    Hi Andrey,

    Not sure if you already found a solution but from my point of view, it looks like you haven't enabled the PEFNG feature in the license settings. 
    AP feature is activated by default but all the other features, like PEFNG or RFProtect need to be enabled manually. 
    could you just check? 


    Florian Baaske
    Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
    Also visit the AirHeads Youtube Channel:
    Feel free to visit my personal Blog