Wireless Access

 View Only
last person joined: 21 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Expand all | Collapse all

mdns hwMon top2 process cost lots of CPU

This thread has been viewed 28 times
  • 1.  mdns hwMon top2 process cost lots of CPU

    Posted Jan 21, 2021 08:36 AM
    Mdns,hwMon and  top2 process cost lots of CPU,how can I fix it in 7220.
    Thanks.






    ------------------------------
    Fans of Aruba
    ------------------------------


  • 2.  RE: mdns hwMon top2 process cost lots of CPU

    Posted Jan 21, 2021 09:33 AM
    Do you have Airgroup enabled?

    ------------------------------
    Christopher Wickline
    ------------------------------



  • 3.  RE: mdns hwMon top2 process cost lots of CPU

    Posted Jan 22, 2021 10:38 PM
    Yes,I have Airgroup enabled,it work in distributed mode with default profile.Forced registeration was disabled.

    ------------------------------
    Fans of Aruba
    ------------------------------



  • 4.  RE: mdns hwMon top2 process cost lots of CPU

    Posted Jan 23, 2021 08:44 AM

    Try and run this command when you see the high CPU Usage

    show airgroup internal-state statistics verbose

    Near the bottom will tell you how much airgroup is using for CPU usage.  if it's high, you may be able to limit it by limiting which services are enabled for aigroup

    But as Herman said, if this is a production setup/you have TAC access, opening a case with them will get you the quickest/best resolution. 



    ------------------------------
    Christopher Wickline
    ------------------------------



  • 5.  RE: mdns hwMon top2 process cost lots of CPU

    Posted Jan 25, 2021 10:58 PM
    We follow the suggestion of support team.We change the Airgroup from distribution mode to centralize mode,the cpu cost was down to 10%.
    Thanks for your help.We will try the other suggestions.

    ------------------------------
    Fans of Aruba
    ------------------------------



  • 6.  RE: mdns hwMon top2 process cost lots of CPU

    EMPLOYEE
    Posted Jan 22, 2021 04:00 AM
    For questions about high CPU/high memory/runaway processes/memory leaks, please try to upgrade to a recent version first. If the issue is still there, open a case with Aruba Support.

    These are situations that are not common, so it's unlikely that you will see a specific answer on this forum to a quite broad question like this one.

    ------------------------------
    Herman Robers
    ------------------------
    If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
    ------------------------------