Wireless Access

last person joined: an hour ago 

Access network design for branch, remote, outdoor and campus locations with Aruba access points, and mobility controllers.
Expand all | Collapse all

Mobility Master show user fails

Jump to Best Answer
This thread has been viewed 7 times
  • 1.  Mobility Master show user fails

    Posted 20 days ago
    Hello at all,

    we have a mobility master environment with several mobility devices.
    If i do "show user" on /mm level there is ​following output:

    (mm01) [mynode] #show user 
    This operation can take a while depending on number of users. Please be patient ....
    (mm01) [mynode] #

    No matter if i filter for a specific mac or user role.

    Regarding to documentation it should work, or am i wrong?

    This command works only on MD intself, but that makes no sense at all if I do not know where user is connected.
    In GUI I see all Users on mm level.

    We are using 8.6.0.8





    ------------------------------
    Florian Kueck
    ------------------------------


  • 2.  RE: Mobility Master show user fails
    Best Answer

    Posted 20 days ago
    "show user" only shows users that actually terminate on the MD.  On the MM there are no users.  On the MM you need to "show global-user-table list"

    ------------------------------
    Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
    ------------------------------



  • 3.  RE: Mobility Master show user fails

    Posted 20 days ago
    Thanks a lot!

    ------------------------------
    Florian Kueck
    ------------------------------