Aruba Apps

 View Only
last person joined: yesterday 

The HPE Aruba Networking Apps board is designed to address questions, comments, and feature requests for all HPE Aruba Networking mobile Apps
Back to discussions
Expand all | Collapse all

Snmpv3 command

This thread has been viewed 43 times

  • 1.  Snmpv3 command

    Posted Apr 16, 2021 03:27 AM
    Hello team,
    Can I get equivalent command for snmpv3 below are the commands of Aruba switch using SNMP V2

    snmp-server community mnm@nasik operator unrestrict
    snmp-server community mwd1w23k operator unrestrict
    snmp-server host 10.5.206.92 community mwd1w23k
    snmp-server host 10.5.206.93 community mwd1w23k
    snmp-server host 10.5.206.95 community mwd1w23k
    exit




    I will create initial setup but what about this commands this will be same for snmpv3 also ? Or any other commands are there for snmpv3?


    ------------------------------
    Shivam Ojha
    ------------------------------


  • 2.  RE: Snmpv3 command

    Posted Apr 17, 2021 02:48 AM
    Hi,

    You can use these command only you need to do is enable the snmpv3

    ------------------------------
    Tharindu Pamoda
    ------------------------------

    Original Message