Wireless Access

last person joined: 4 minutes ago 

Access network design for branch, remote, outdoor and campus locations with Aruba access points, and mobility controllers.
Expand all | Collapse all

Error - xSec allowed VLANS are required for xSec Point-to-Point Configuration

  • 1.  Error - xSec allowed VLANS are required for xSec Point-to-Point Configuration

    Posted Aug 10, 2015 07:44 PM

    I'm getting the error mentione in the subject when trying to apply any port configuration in the Web UI of a 7005 controller running 6.4.2.10.

     

    This is a controller right out of the box.  I've licensed it and put some IPs on it.  I was able to get LACP configuration to stick as well.  I started on an earlier version and got the error, so I updated to the latest and greatest and still get the same thing.

     

    I don't have an xSec license and the xSec module is disabled, so I don't understand why I'm getting this message.

     

    Please advise.

     

    Thanks.

     

    *I guess it's not an error, because configuration seems to be sticking, but it's annoying since I don't have xSec enabled anywhere.  Should I just ignore it?


    #7005


  • 2.  RE: Error - xSec allowed VLANS are required for xSec Point-to-Point Configuration

    Posted Aug 11, 2015 01:54 AM

    Open a TAC case to make sure, but you should be able to ignore it. xSec isn't even supported on the 7000 controllers.



  • 3.  RE: Error - xSec allowed VLANS are required for xSec Point-to-Point Configuration

    Posted Aug 11, 2015 01:03 PM

    Thanks.  I will put in a request with TAC to let me know if this is something I should be concerned about.



  • 4.  RE: Error - xSec allowed VLANS are required for xSec Point-to-Point Configuration

    Posted Aug 18, 2015 01:06 PM

    TAC is still working on it in the lab per their last reply to me.