I have 24 ap-105 with ArubaOS 184.108.40.206-220.127.116.11. In Virtual Controller 23 Access points have the right ip address, 1 have a wrong ip address! IP address is manually configured to 192.168.199.242 and it ping and ssh to the right ip address.
IP adress 192.168.199.130 is incorrect and do not respond to any ip port.
Sending result of "show aps scanning"
There is a command to rescan APs from virtual controller?
I tried to convert the AP to standalone and rejoin to virtual control, but it was useless.
Did you try the reset proceudre? http://community.arubanetworks.com/t5/Controller-less-WLANs/Where-is-the-reset-button-on-the-IAP-and-how-do-I-reset-the-IAP/ta-p/180980
No, because the APs are very difficult to reach so I was looking for a remote solution.
At Aruba, we believe that the most dynamic customer experiences happen at the Edge. Our mission is to deliver innovative solutions that harness data at the Edge to drive powerful business outcomes.
© Copyright 2021 Hewlett Packard Enterprise Development LPAll Rights Reserved.