We have taken over the management of a Ubiquiti wireless network and I am looking to replace the UniFi Pro access points with IAP103 access points with cloud management. There is currently a corporate SSID utilising PEAP MSCHAPv2 and a guest SSID utilising an external captive portal.
My question is how do you fault find 802.1X associations when the access point is in Instant mode? When you have a campus access point you can use the excellent show auth-tracebuff command but this command does not appear to be available when the access point is in Instant mode.
Try this, It may be what your looking for.
show ap debug auth-trace-buf
Thanks for that Jamie. I tested it and it worked AOK. The only thing missing from the campus mode command is the count argument but I will just clear the log before each authentication test.
Yeah true. It loads up the CLI with entries. Glad to help.
At Aruba, we believe that the most dynamic customer experiences happen at the Edge. Our mission is to deliver innovative solutions that harness data at the Edge to drive powerful business outcomes.
© Copyright 2020 Hewlett Packard Enterprise Development LPAll Rights Reserved.