i have a Aruba 3600 controller with 172.16.0.0 vlan [vlan 1].[dhcp enabled]
Now i am implement another vlan [vlan 2] of 172.17.0.0 network assigned in port 3. [dhcp enabled]
now when i plug a ap in port 3 [vlan 2] its getting ip of 172.17.0.0 network and identify is master as 184.108.40.206. but controller cant show the ap.
vlan 1 = dhcp 172.16.0.0 network.
vlan 2 = dhcp 172.17.0.0 network.
please tell me now what i have do.
how can this ap broadcast ssid?
thanks in advance.
Change the IP address of your master :
interface vlan 1
no ip address
ip address dhcp-client
and then do controller-ip vlan 1
And in your AP System-Profile to IP it picked.
I suggest to use a static IP for your controller instead.
look my controller already have a static ip which is 172.16.0.254.
ap can recognise it as a master. But the problem is controller cant recognise the ap.
Ap on different vlan [vlan2 = 172.17.0.0]
controller on different vlan [vlan1=172.16.0.0]
in vlan 2 dhcp [172.17.0.0] working fine, it gives dynamic ip to ap.
Do you have CPSec enabled ? show control-plane-security
Have you installed licenses ? show ap license-usage
yeah. the cpsec is on and all the licence is installed.
At Aruba, we believe that the most dynamic customer experiences happen at the Edge. Our mission is to deliver innovative solutions that harness data at the Edge to drive powerful business outcomes.
© Copyright 2021 Hewlett Packard Enterprise Development LPAll Rights Reserved.