Does anyone know of a report or a filter view in AirWave that will show the switch port that an AP is connected to? I can get the AP's MAC address-to-switchport mapping info from the CLI, but I also have a filter view set up in AirWave that includes the AP name and MAC - it would be great if that view could also include the switchport that the AP connects to.
Think I have something that will work (at least for my purposes): in the MAS web GUI, under 'Dashboard', you can go to 'Neighbor Devices' and find a mapping of MAC address to switch port to System Name, which is pretty much what I was after. You can sort or filter on those columns to narrow it down to what you want to see.
I am also curious about this - we need to do an audit of our documentation after a recent install and I see that you can list out the upstream device in the device view, but it doesn't seem that you can specify the port of that device. This would save us a lot of manual audit time if there was a way to view/report on this from Airwave....
Disclaimer- this may not be the safest or most efficient method, but it works
LLDP Neighbor info can be found in the output of show ap tech-support ap-name "apname"
You can use AirRecorder (from the Aruba utilities page) to dump this info to a file. Then grep for relevant lines or filter in Excel.
At Aruba, we believe that the most dynamic customer experiences happen at the Edge. Our mission is to deliver innovative solutions that harness data at the Edge to drive powerful business outcomes.
© Copyright 2021 Hewlett Packard Enterprise Development LPAll Rights Reserved.