I need some help with our Aruba IAP-225 device which is in a cluster. The cluster has 2 AP's in it.
The issue we are facing is that the Aruba IAP does not seem to send the SSID with the requests it forwards to the Cisco ACS.
I recollect a similar setting in the Aruba 7005 where we had to mention send the SSID and wanted to confirm if something similar is also present on the IAP-225.
Any comments/help on this one?
The ACS setting for the Aruba IAP and the Aruba 7005 is similar.
That has not been imported, is there a guide on how to do that? We are running ACS version 5.5.
Interestingly as I mentioned earlier the Aruba controllers i.e. 7005 and 7010 work fine.
Try the page here: http://alec.dhuse.com/?p=15
The attribute you are looking for is "Aruba-Essid-Name" (VSA 5).
At Aruba, we believe that the most dynamic customer experiences happen at the Edge. Our mission is to deliver innovative solutions that harness data at the Edge to drive powerful business outcomes.
© Copyright 2020 Hewlett Packard Enterprise Development LPAll Rights Reserved.