Wireless Access

last person joined: 2 days ago 

Access network design for branch, remote, outdoor and campus locations with Aruba access points, and mobility controllers.
Expand all | Collapse all

HA AP Fast Failover Issue

  • 1.  HA AP Fast Failover Issue

    Posted Apr 10, 2015 04:33 PM

    I'm having trouble configuring the ha-fast failover feature.

    I have two 7220s running 6.4.2.4FIPS with VRRP & centralized licensing configured.

    If someone can please look at my configuration below and see what's wrong:(note: not real ip addresses)

     

    master ip address: 10.1.1.1

    standby-master ip address: 10.1.1.2

    VRRP ip address: 10.1.1.3

     

    Master controller ha failover config:

    Ha group-profile AP-Failover
    controller 10.1.1.1 role dual
    controller 10.1.1.2 role dual
    state-sync
    pre-shared-key password
    exit
    Ha group-membership AP-Failover

     

     

    Standby-Master controller ha failover config:

    Ha group-membership AP-Failover

     

    Thanks. 



  • 2.  RE: HA AP Fast Failover Issue

    Posted Apr 10, 2015 05:41 PM
    Did you assigned the master IP address under the ap system profile > LMS-IP ?


  • 3.  RE: HA AP Fast Failover Issue

    Posted Apr 10, 2015 05:48 PM

    No, I have the VIP configured as lms-ip under the ap system profile



  • 4.  RE: HA AP Fast Failover Issue

    Posted Apr 10, 2015 06:57 PM
    It should be pointing to the active controller not the VIP

    The vrrp is to build the master redundancy not the AP redundancy that's why you adde the ip addresses of each controller in the group