Wireless Access

last person joined: 5 hours ago 

Access network design for branch, remote, outdoor and campus locations with Aruba access points, and mobility controllers.
Expand all | Collapse all

i have a question may some one help me on this attached document.

  • 1.  i have a question may some one help me on this attached document.

    Posted Apr 13, 2015 01:23 AM
      |   view attached


  • 2.  RE: i have a question may some one help me on this attached document.

    Posted Apr 13, 2015 01:26 AM
    This is not possible with a single RAP.


    Thanks,
    Tim


  • 3.  RE: i have a question may some one help me on this attached document.

    Posted Apr 13, 2015 01:28 AM

    is any other way of connecting provide your alternate idea please.



  • 4.  RE: i have a question may some one help me on this attached document.

    Posted Apr 13, 2015 08:39 AM

    Here's an alternaive that would work but might not be the most appropriate.

     

    Remote mesh.

     

    1. Setup your RAP as a remote mesh portal. 
    2. Configure another RAP as a mesh point and place near Cisco IP Phone
    3. Configure wired port on the mesh point to be on Cisco IP Phone VLAN
    4. Connect IP Phone to mesh point wired port.