I'm a newbie at WLC and I'm currently using SNMP on WLC to get the port number and mac-address-table from switch to determine which AP clients are connected to, although i found this doesn't run smoothly at times and the results are not so correct. I'm wondering if there's any alternative way to do this.
Thanks in advance guys.
Are you using any third party SNMP tool to pull the clients connected info from controller?
Have you uploaded Aruba MIB files to tool and may i know what OID you are using ?
Sorry for the late reply, i'm currently using the SNMP OID
220.127.116.11.18.104.22.168.3.1.1 to get the MAC address and
22.214.171.124.126.96.36.199.3.1.2 to get the port, not any third party tool.
and my controller is running on Ubuntu 14.04
Thank you for your time.
At Aruba, we believe that the most dynamic customer experiences happen at the Edge. Our mission is to deliver innovative solutions that harness data at the Edge to drive powerful business outcomes.
© Copyright 2021 Hewlett Packard Enterprise Development LPAll Rights Reserved.