Wireless Access

last person joined: 22 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Apply SSID policy to AP 105,205 and 3x5

This thread has been viewed 0 times

  • 1.  Apply SSID policy to AP 105,205 and 3x5

    Posted Sep 19, 2017 05:28 AM

    Hello,

     

    I don't know since when but now when I want to create a new SSID and to apply it to all my APs I didn't have the same behavior following sites.

    I am using a cluster of 3400 with the latest version available and I am using 3 kind of sites

    site 1 with AP105 only

    site 2 with AP 205 and 325

    site 3 with AP 105,205 and 325

     

    with old and even new SSID when I want to apply it

    Site 1 : SSID is well applied

    Site 2 : SSID is well applied

    site 3 : only AP 205 and 305 recieved the policy but not 105

     

    And I don't know if I missed something or how I can troubleshoot why on site with AP 105 and 205 , AP105 didn"t receive the SSID ?

    thanks for your help

    Regards

     



  • 2.  RE: Apply SSID policy to AP 105,205 and 3x5

    EMPLOYEE
    Posted Sep 19, 2017 06:00 AM

    How is that SSID configured different from the other 2?



  • 3.  RE: Apply SSID policy to AP 105,205 and 3x5

    Posted Sep 19, 2017 06:14 AM

    no I am sure of my parameter

     

    Site with 2 different model AP105 and AP205: AP105 didn't receive the SSID

    site with AP105 only works

     

    how can i troubleshoot such issue ?



  • 4.  RE: Apply SSID policy to AP 105,205 and 3x5

    EMPLOYEE
    Posted Sep 19, 2017 06:25 AM

    You need to start by comparing the differences between configurations on each SSID.

     

    You can also type "show ap bss-table" to see what SSIDs are really being broadcast from each access point.

     

    Typing "show profile-errors" might also give you an idea what your problem is.



  • 5.  RE: Apply SSID policy to AP 105,205 and 3x5

    Posted Sep 19, 2017 10:27 AM

    In fact I found the solution and it's about the number of SSID supported by the AP105 (16 BSSID) so in my case 8 BSSId per radio( 2.4, 5G) and I reach this limit.

     

    Sorry and many thanks to people who helped me.