I understand that power and channel limits are based on regulatory domain and not based on AP model. I have issued the "show ap max-allowed-EIRP" command on two different AP models, as seen below:
How can they be allowed to transmit different power levels?
There are multiple regulatory requirements that affect the max EIRP transmit power. The generic in-band power limits are just one of them. Out-of-band and band-edge emissions are examples of other regulatory requirements that are affected by transmit power. These will vary from radio to radio, which is why you will see different power limits for different APs.
Also, the hardware capabilities are different for different APs. In the case where we're allowed to transmit at the max capabilities of the harwdare, that will also result in different limits for different APs.
At Aruba, we believe that the most dynamic customer experiences happen at the Edge. Our mission is to deliver innovative solutions that harness data at the Edge to drive powerful business outcomes.
© Copyright 2021 Hewlett Packard Enterprise Development LPAll Rights Reserved.