Network Management

last person joined: 2 days ago 

Keep an informative eye on your network with IMC and AirWave network management solutions.
Expand all | Collapse all

VisualRF doesn't work properly with heatmaps

Jump to Best Answer
  • 1.  VisualRF doesn't work properly with heatmaps

    Posted Jul 25, 2017 03:30 PM

    Hello everyone,

     

    I have a problem with VisualRF and its heatmaps. I have uploaded a map, measured, drawn the walls and placed 4 APs. The problem is the signal strength shown in the heatmap doesn't attenuate behind concrete walls or drywalls, the signal strength is the same in the whole map. Furthermore, if I change the APs transmit power or disable one radio under AP > Properties, the heatmap is still the same.

    Below is the heatmap:

    heatmap.PNG

    Am I missing anything? Is there any further option I have to enable?Please help.

     

    Regards,

    Julián



  • 2.  RE: VisualRF doesn't work properly with heatmaps

    Posted Jul 25, 2017 04:17 PM

    Hi guys,

     

    By the way, for this I am using VisualRF demo version 8.

     

    Regards,

    Julián



  • 3.  RE: VisualRF doesn't work properly with heatmaps
    Best Answer

    Posted Jul 26, 2017 05:21 AM

    Hi Julian,

     

    It looks grid size of the floor plan is large thats the reason we are not seeing -45/-55/-65dbm singal cutoff areas. Try resize the floor plan using measure option in VisualRF.

    2.5.PNG

    Regards,

    Pavan