I need to clarify MM Licensing: If I have 10 MC and 2000 AP running 6.x and i now migrate to 8.1
In 6.x I have 2000 AP-Lic
When I now migrate to 8.1 and the MM is only to configure the MC and will not terminate any AP how much/which Lics I need to add?
I thought I have to add 10 extra Lics for the 10 MC and migrate the 2000 AP-Lic to run on the MM.
thank you, this made it clear:
agree, the screenshot answered my question too.
Just a quick quest regarding the MM-VM.
If I wanna do failover netween MM I will need to purchase basically double MM-VA-250 for each device.
Meaning 2 MM for 250 Devices for HA eqauls 2X250 MM-VA-250 Correct?
It will start of with 180AP's and 2 MC running in HA and room for growth on the AP's.
There is no 250 AP MM. Do you plan Master/standby (layer2 redundancy) or primary/secondary (layer3 redundancy)?
For Layer2 redundancy I think you need
1x MM-VA-500 (install it twice for Master/Standby)
Service and maybe 180x PEF, 180x RF-Protect , ...
i attached a screenshot with 4 MM: primary active/standby + secondary active/standby which terminate only MC.
For that setup with 500AP i wanted to clarify the licensing:
2x MM-VA-500 (for standby just install it twice?)
1000 Lic AP (500 for primary and 500 for secondary)
can somebody confirm that?
At Aruba, we believe that the most dynamic customer experiences happen at the Edge. Our mission is to deliver innovative solutions that harness data at the Edge to drive powerful business outcomes.
© Copyright 2021 Hewlett Packard Enterprise Development LPAll Rights Reserved.