I try to setup the VMC with one trunk port.
My Port configuration from VMC:
interface gigabitethernet 0/0/0
trusted vlan 1-4094
switchport mode trunk
interface vlan 4
ip address 192.168.1.254 255.255.255.0
The configuration on ESXi is as follow:
If I change the vSwitch fixed to VLAN 4 it works.
Thanks for helping.
Try setting the native vlan on the trunk to something you don't use like VLAN 1. The set the trunk allowed vlans to all.
I add some weird issues with this for a customer as well.
Thank you very much. That was the solution. :)
This also worked for me on Brocade switches. Thank you!
At Aruba, we believe that the most dynamic customer experiences happen at the Edge. Our mission is to deliver innovative solutions that harness data at the Edge to drive powerful business outcomes.
© Copyright 2020 Hewlett Packard Enterprise Development LPAll Rights Reserved.