Aruba Apps

last person joined: 20 minutes ago 

Aruba Apps board is design for questions, comments, and feature requests for all of Aruba Networks' mobile Apps.
Expand all | Collapse all

Bandwidth usage VIA VPN Clients

Jump to Best Answer
  • 1.  Bandwidth usage VIA VPN Clients

    Posted Dec 15, 2017 06:08 AM

    Hi All,

     

    Is there any information about the (avarage) bandwidth usage of VIA VPN Clients? The VIA VPN Client (version 3.0.0.0.87840) connects in this case to a Aruba Controller 3400.

     

    Thanks,

    Charlotte



  • 2.  RE: Bandwidth usage VIA VPN Clients
    Best Answer

    Posted Dec 15, 2017 08:47 AM
    I would imagine this varies massively between customers.
    This would very much depend on:
    - what your clients were doing over the VPN
    - if the VIA client was configured to split tunnel traffic or not.

    The VIA client sends the controller a keep-alive message every 15 seconds. So, with that in mind, the bandwidth the client itself uses is minimal.

    Does that answer your question?

    Or are you wanting to know about the overhead that the VIA client adds to the traffic that flows over the VPN? In which case, it's just IPSEC so (quickly googles) it adds about 10% give or take a few percent.


  • 3.  RE: Bandwidth usage VIA VPN Clients

    Posted Dec 15, 2017 09:04 AM

    Hi James,

     

    I understand that it depends on the clients doing. The VIA Client is not set to Split Tunneling. Thank you for the information.

     

    Thanks

    Charlotte