Wireless Access

last person joined: 11 hours ago 

Access network design for branch, remote, outdoor and campus locations with Aruba access points, and mobility controllers.
Expand all | Collapse all

Received Signal Strength Indication value

Jump to Best Answer
  • 1.  Received Signal Strength Indication value

    Posted Oct 03, 2017 04:39 AM

    Hi everyone, 
    I'm a newbie with Aruba's equipments, and when i use SSH to access the Aruba IAP with these commands: "show ap client-probe-report 0" and "show ap client-probe-report 1" there is a value named RSSI and i'm wondering on what scale is the RSSI measured and what is the max value of it?
    Thank you in advanced guys!



  • 2.  RE: Received Signal Strength Indication value
    Best Answer

    Posted Dec 04, 2017 10:05 AM

    I'm not sure if that information is available. You probably have read already https://en.wikipedia.org/wiki/Received_signal_strength_indication on the meaning of RSSI which is not very well defined nor how you should use the numbers.

     

    I just tested and with a client on the AP, I have seen 89 as maximum value of my measurements.